07 4785 2850
Training Courses
TLILIC0024 Licence to Operate a Vehicle Loading Crane
(capacity 10 metre tonnes and above)
Course Overview
This course aligns with TLILIC0024 – Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) from the Transport and Logistics Training Package. Participants will gain the skills and knowledge required to safely operate a vehicle loading crane, in accordance with Work Health and Safety (WHS) regulations, Australian Standards, and industry best practices.
This course is a mandatory requirement for obtaining a High Risk Work Licence (HRWL) to operate vehicle loading cranes in Australia.
View full unit details on training.gov.au
🛠️ Training is delivered directly by Corrsafe Enterprises Pty Ltd (RTO 40621). No third-party providers are used.
Who Should Enrol?
This course is suitable for individuals who:
✔️ Operate or are required to operate a vehicle loading crane (10 metre tonnes and above) as part of their job.
✔️ Are seeking a High Risk Work Licence for this class of equipment.
✔️ Want to enhance their understanding of safe crane operations across various industries, including construction, logistics, mining, and utilities.
What You’ll Learn
The course covers the following key areas:
✅ Planning and preparing for vehicle loading crane operations, including risk assessments and lift planning.
✅ Identifying hazards and implementing risk control measures.
✅ Conducting pre-operational checks and routine maintenance.
✅ Setting up, stabilising, and operating the crane safely within load limits.
✅ Using communication systems and signals to coordinate lifts with ground crew.
✅ Monitoring loads, environmental conditions, and equipment performance during operation.
✅ Responding to emergency situations and applying workplace emergency procedures.
✅ Understanding and applying relevant legislation, codes of practice, and manufacturer guidelines.
Prerequisites & Entry Requirements
🔹 Minimum Age: Students may undertake the training prior to turning 18; however, they cannot apply for their HRWL until they are 18 years of age.
🔹 English Language: Participants must complete a Language, Literacy, and Numeracy (LLN) assessment to ensure they can meet course requirements. We offer LLN assistance, learning support, and referrals to other services. Speak with our team before enrolment if you require additional assistance.
🔹 Physical Fitness: A reasonable level of fitness is required for the practical components.
🔹 Identification: 100 points of original, valid photo ID (e.g. Driver Licence, Passport, Medicare card, Financial Institution card)
🔹 USI Requirement: Participants must have a Unique Student Identifier (USI) to enrol. Visit www.usi.gov.au for more info.
🔹 PPE: Participants must wear appropriate Personal Protective Equipment (PPE) including high-visibility shirt or vest, and closed in shoes.
📋 Note: All participants complete a brief Learner Suitability Self-Assessment at the start of the course to confirm their readiness and identify any support needs.
Course Duration
A typical vehicle loading crane course is delivered over four days.
Approx. 40–45 hours total learning:
🔹 Supervised training & assessment: 24–30 hours
🔹 Pre-course study & independent learning: 8–12 hours
Course Delivery Methods
This course is delivered via blended or face-to-face training, depending on learner needs.
🔹 Face-to-Face Delivery may run over 1 or 2 days depending on whether pre-learning is completed beforehand.
👉 All learners, regardless of delivery mode, must complete a short Challenge Test at the start of the face-to-face session to confirm readiness and verify knowledge.
Training and assessment are conducted by WHSQ-approved assessors using the National Assessment Instrument (NAI).
Assessment Methods
🖊️ Knowledge Test – WHS, risk controls, load charts, and communication.
⚙️ Practical Assessment – demonstrate:
🔹 Pre-start checks & lifting gear inspection
🔹 Setting up & stabilising the crane
🔹 Interpreting load charts
🔹 Lifting, moving & placing loads safely
🔹 Dogging signals & communication
🔹 Shutdown & securing procedures
📑 WHSQ NAI – required for your CV High Risk Work Licence.
Certificate & Outcome
Upon successful completion, you will receive a Statement of Attainment for TLILIC0024 – Licence to operate a vehicle loading crane capacity 10 metre tonnes and above issued by Corrsafe RTO 40621, a registered training organisation recognised under the Australian Qualifications Framework (AQF).
You will also receive a Notice of Satisfactory Assessment (NSA) which can be used to apply for your High Risk Work Licence (HRWL – CV class) through Workplace Health and Safety Queensland or relevant state authority.
📢 Please note: Completion of training and assessment does not guarantee the issue of a High Risk Work Licence. Participants must submit their Notice of Satisfactory Assessment (NSA) to Workplace Health and Safety Queensland (WHSQ) (or relevant authority in their state) within 60 days to apply for the licence. Additional application and licence fees apply.
📋 Already completed TLILIC0024 elsewhere? You may be eligible for a credit transfer for the training component. However, all learners must still complete the WHSQ-mandated National Assessment Instrument (NAI) to apply for a High Risk Work Licence. All credit transfer applications must include a verified Statement of Attainment or transcript. Corrsafe will confirm authenticity with the issuing RTO prior to granting credit.
These units are nationally recognised under the Australian Qualifications Framework (AQF) and meet industry compliance standards. Please click here to view our information page: What is Nationally Recognised Training?
Applying for a High Risk Work Licence
Upon successful completion of the assessment and being deemed Competent by Corrsafe, candidates are eligible to apply for a High-Risk Work Licence (HRWL) for Vehicle Loading Crane.
Applications must be submitted via the WorkSafe QLD Online Services portal. The application fee is approximately $109.71 per class.
Applicants are required to hold a Queensland Digital Identity (QDI). From 16 March 2025, all previous QGov accounts will be migrated to QDI, and applicants will be prompted to verify their identity during the application process.
To complete the application, you will need:
🔹 Your current HRWL (if applying to add an additional class)
🔹 A valid form of identification issued by the Department of Transport and Main Roads (e.g., QLD driver licence, adult proof of age card, or customer reference number)
Payments can be made by credit card or BPAY. If you are unable to complete the application online, please contact WorkSafe Queensland on 1300 631 948.
Reassessment Information – Not Yet Competent
Candidates who are assessed as Not Yet Competent may contact Corrsafe to arrange a reassessment. Please phone (07) 4785 2850 or email admin@corrsafe.com.au. A reassessment fee of $300 may apply. Where only one component of the assessment has been failed, the reassessment must be completed within 60 days. Failure to do so will require the candidate to repeat both components of the assessment.
Candidates who are unsuccessful in both components may collect their logbook and continue practical experience under the supervision of a current HRWL holder until they are ready to reattempt the assessment.
Career & Job Opportunities
This qualification is essential for roles such as:
🚚 Crane Truck Operators
🏗️ Construction and Infrastructure Workers
🏭 Transport, Logistics & Warehouse Personnel
🔧 Utilities, Engineering & Maintenance Operators
⛏️ Mining and Heavy Equipment Handlers
Why Choose Us?
🏆 Corrsafe RTO 40621 is a trusted provider of nationally recognised High Risk Work training.
🏆 Industry Expertise: Our trainers are fully qualified and bring real-world experience in crane operations.
🏆 Compliant & Current: Training is conducted in line with WHSQ and ASQA standards.
🏆 Practical Focus: Our facilities replicate real-world conditions to prepare participants for actual job tasks.
🏆 Flexible Delivery: On-site and group training options available.
🏆 Qualified Trainers: All training is delivered by WHSQ-accredited assessors and qualified trainers who meet current regulatory and industry competency requirements.
Funding
This course is eligible for Construction Skills Queensland (CSQ) funding under the 2025–2026 Short Course Program. CSQ provides financial support to help upskill Queensland’s building and civil construction workforce.
CSQ Subsidy available: $1300.00
Student Contribution: $550.00
(includes $500.00 CSQ-mandated co-contribution fee + $50.00 non-funded administration fee)
Applicants must receive written confirmation of CSQ funding approval before commencing training, as retrospective claims are not permitted. Funding is subject to eligibility and availability.
👉 For full eligibility details and information on how to apply, visit our CSQ Funding Information Page.
Refund / Fee Policy Disclosure
A full breakdown of fees, inclusions, payment options, and our refund policy is available in our Student Handbook or upon request.
Learner Wellbeing & Support
At Corrsafe Enterprises (RTO 40621), we support the whole learner not just their assessments. If you’re facing challenges, we’re here to help.
Support Available:
We’re committed to a safe, inclusive, and supportive learning environment that helps every learner thrive.
Enrolment Process
We make enrolment simple and hassle-free. To secure your place:
1️⃣ Select your preferred course date below.
2️⃣ Complete the online enrolment form.
3️⃣ Receive your confirmation email with full course details and pre-course learning materials.
4️⃣ Attend your scheduled training and assessment session.
📞 Phone: 07 47 852 850
📧 Email: admin@corrsafe.com.au
TLILIC0024 Licence to Operate a Vehicle Loading Crane
(capacity 10 metre tonnes and above)
Online Training
There are currently no openings available for this course.
Face to Face Training
A third day, scheduled after the dates listed below, is required to complete the mandatory National Assessment Instrument (NAI) to obtain your High Risk Work Forklift Licence.
There are currently no openings available for this course.
🎓 Recognition of Prior Learning (RPL)
If you already have significant experience operating vehicle loading cranes, you may be eligible for RPL. This process assesses your existing skills and knowledge against the requirements of TLILIC0024 – Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above).
To apply, you’ll need to provide valid, sufficient, and current evidence, which may include:
📁 A portfolio of relevant work experience (e.g., operating vehicle loading cranes on-site)
✅ Employer or supervisor third-party verification statements (template available on request)
🎓 Previous accredited Statements of Attainment or USI Transcript
🛠️ A practical demonstration of your crane operating skills, including load chart interpretation and dogging signals
🗣️ Responses to assessor questions or an interview to confirm knowledge of legislation, WHS requirements, and risk controls
⚠️ Important: Because this is a High Risk Work Licence unit, all candidates must complete the WHSQ-mandated National Assessment Instrument (NAI) in full. RPL cannot be granted for this final licensing step.
📜 Credit Transfer (CT)
If you have previously completed TLILIC0024 or an equivalent unit, you may be eligible for a Credit Transfer. A verified Statement of Attainment or AQF Transcript must be supplied.
Address
65 Bootooloo Road
Bowen, QLD
RTO
40621
ABN
16 131 343 756